Model 9202

U.S. List Price: $2274.00

• Request a Quote
• Find a Rep

• Share It
• Email to a friend
• Print this page

Model 9202 Product Details

Model 9202 is a thermostatic mixing valve that mixes hot and cold water to supply tempered water to one or more emergency drench showers and eyewash fixtures requiring flow up to 40 gpm. Unit employs two separate thermostatic mixing elements and includes three outlet temperature gauges. Unit is constructed of bronze, brass, copper and stainless steel.

• Tempered Water: Twin thermostatic mixing elements respond independently to changes in incoming hot and cold water temperatures to maintain outlet temperatures to within +/-5°F (2.5°C). Varying conditions can be up to a 30°F (16°C) change in hot water temperature, 30°F (16°C) change in cold-water temperature, and a 50% drop in inlet supply pressure. Inlet hot and cold pressures must be equal. The outlet temperature factory setting is 80°F (26°C).
• Fail-Safe Back Up: Liquid thermal thermostats with tamper-resistant control adjustment. System shuts off all incoming hot water should cold water supply fail. Redundant thermostatic elements provide tempering even when one element fails. Should the hot water supply become interrupted, or the thermostatic elements fail, the valve will go into cold-water bypass flow. *Note: In bypass mode, valve offers more resistance to flow than when functioning normally. Therefore, depending on facility pressure available, the fixture may not function to ANSI Standards when valve is in bypass mode. See chart in the 9202 O&M for pressure requirements in both tempered and bypass modes (accessible at: www.hawsco.com).
• Maximum inlet pressure: 125 psi. Maximum inlet temperature: 180°F (82°C). Minimum inlet temperature: 120°F (49°C). Recommended inlet temperature: 140°F (60°C).
• Inlet and Outlet: 1-1/4" IPS. Inlets can be connected from top or bottom. Isolation check valves are supplied for installation at inlet and outlet.

Buy America Act Information

The vast majority of Haws products qualify under the terms of the act. However, since different purchases often require subtly different responses, Haws recommends that the specific document requesting certification be sent to customer service for a specific answer.

Model 9202 Components

Model 9202 Options & Accessories

	Tempered Water Blending Systems Model TWBS.SH, prepackaged, fully engineered and tested system for mixing hot and cold water to provide tempered water up to 40 gpm for emergency showers and eyewashes (Pat.# 5,350,112).
	Tempered Water Blending Valves Model 9201, thermostatic mixing valve that mixes hot and cold water for the tempering of eye/face wash units at a maximum flow rate of 20 gpm.
	Cabinet Model 9205.SUR is a surface mounted 18-gauge stainless steel cabinet, Type 304 with a No. 4 finish, used for models 9201 and 9202. Size: 23-1/2" H x 19" W x 7" D.
	Cabinet Model 9205.REC is a recessed mounted 18-gauge stainless steel cabinet, Type 304 with a No. 4 finish, used for models 9201 and 9202. Size: 23" H x 19" W x 7" D.
	Tempered Water Blending Systems Model 9325, an electric water heating system designed to eliminate the need for large water storage tanks, as well as the continuous energy demand to maintain them at higher temperatures.