Model 7778B

Model 7778B

U.S. List Price: $1480.00

Pricing Terms

Model 7778B, wall-mounted eye/face wash with face spray ring and dust cover, with all stainless steel components.

Model 7778B Product Details

Haws emergency eyewash and face ring systems, like the all stainless steel 7778B, include anti-surge Soft-Flo heads and 16 spray opening ring, making them ideal for both the eye and face irrigation process. Unit is equipped with an in-line 50 x 50 mesh water strainer and stainless steel dust cover, so when debris is present, the irrigation process stays protected. Space efficient stainless steel design and integral wall bracket allow the 7778B to be mounted in a number of easily accessible locations.

  • A great addition to multiple unsafe environments where the eyes and face may be exposed to corrosive materials.
  • Easily detected and maintained, emergency equipment is equipped with safety sign and test card to record weekly testing.
  • Reducing installation time, eye/face wash and valve assembly is pre-built and fully water/pressure tested.
  • Type 304 Stainless Steel construction make for one corrosive resistant piece of equipment.
  • Certified by CSA & IAPMO to meet the ANSI Z358.1-2009 Standard for Emergency Eyewash and Shower Equipment.

Buy America Act Information

The vast majority of Haws products qualify under the terms of the act. However, since different purchases often require subtly different responses, Haws recommends that the specific document requesting certification be sent to customer service for a specific answer.

Industry Standards Compliant

Model 7778B Components

SP18

Eyewash Head
Model SP18 Type 303 stainless steel Soft-Flo anti-surge eyewash head. 1/4" IPS.
SP175

Universal Sign
Model SP175 vertical universal emergency eyewash sign. Size: 8" x 10-3/4".
SP35SS

Eyewash Flow Control
Model SP35SS stainless steel 1.2 gpm flow control assembly. Controls water flow rate when flow pressure is between 30 and 90 psi.
SP90

Receptor
Model SP90 11" round stainless steel with No. 2L bright finish on exterior.
SP228

Eyewash Valve
Model SP228 Type 316 stainless steel stay-open ball valve, equipped with a stainless steel ball and stem. Full flow occurs with push on stainless steel flag. 1/2" IPS inlet x 1/4" IPS outlet.
SP30

Face Spray Ring
Model SP30 circular raised Type 304 electropolished stainless steel face spray ring with 16-spray openings to bathe entire facial area.
SP509SS

In-Line Strainer
Model SP509SS is a Type 304 stainless steel in-line 50 x 50 mesh water strainer that prevents debris from reaching the eye/face wash. Easily serviceable. 1/2" IPS inlet x 1/4" IPS.
SP170

Test This Week Tag
SP170 is a green waterproof test card with space for date and initials of inspector. Used to record weekly testing of emergency equipment.
9102

Dust Cover
Model 9102 is a stainless steel cover that protects the eyewash heads as well as the bowl. Pushing the stainless steel flag will activate the unit while raising the dust cover.
SP34SS

Face Spray Ring Flow Control
Model SP34SS stainless steel cross equipped with a 1.2 gpm flow control for use with SP30 face spray ring. Controls water flow rate when flow pressure is between 30 and 90 psi.

Model 7778B Options & Accessories

TWBS.EW

Tempered Water Blending Systems
Model TWBS.EW, prepackaged, fully engineered and tested hot and cold water blending system with fail-safe features to produce up to 5 gpm tempered water for eye/face washes (Pat.# 5,350,112).
9201

Tempered Water Blending Valves
Model 9201, thermostatic mixing valve that mixes hot and cold water for the tempering of eye/face wash units at a maximum flow rate of 20 gpm.

Model 7778B Downloads

Cleaning & Maintenance

Clean and polish with Wright's silver cream; or use mild detergent, liquid soap, or commercial chrome polish. Do not use abrasive or caustic cleaners.

Model 7778B Sample Specifications

Model 7778B wall-mounted eye/face wash shall include a stainless steel 11" round bowl, Soft-Flo stainless steel anti-surge heads with built-in 1.2 gpm flow controls, stainless steel face ring, and stainless steel ball valve equipped with stainless steel ball and stem. Unit shall also include stainless steel wall bracket, stainless steel dust cover, universal sign, 1/2" IPS inlet, and 1-1/4" IPS waste.