Model 8330

Model 8330

Model 8330, corrosion-resistant, all stainless steel combination shower with AXION MSR™ eye/face wash and showerhead.


Write a Review

Model 8330 Description

Haws Model 8330 stainless steel combination shower and eye/face wash features the medically acclaimed AXION MSR™ eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR™ also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. The combination unit is equipped with an in-line 50 x 50 mesh water strainer and stainless dust cover, so when debris is present, the irrigation process stays protected. A great addition to unsafe environments where the eyes, face, and body may be exposed to corrosive materials.

  • Features an 11" (27.9 cm) stainless steel bowl and 9" (22.9 cm) floor flange
  • Requires minimal maintenance and is equipped with test card to record weekly testing
  • Reducing installation time, eyewash and valve assembly is pre-built and fully water/pressure tested
  • Solid 1-1/4" Type 304 Stainless Steel construction makes for one sturdy piece of corrosive resistant equipment
  • Provided with universal emergency sign and high visibility stripe
  • Supply and Waste: 1-1/4" IPS


Model 8330 is certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Buy America Act Information

The vast majority of Haws products qualify under the terms of the act. However, since different purchases often require subtly different responses, Haws recommends that the specific document requesting certification be sent to customer service for a specific answer.

Industry Standards Compliant

Model 8330 Components

SP200

Pull Rod
Model SP200, 28" (71.1 cm) long stainless steel pull rod with triangular handle.
SP265

Shower Valve
Model SP265 Type 316 stainless steel stay-open ball valve with stainless steel ball and stem.
SP90

Receptor
Model SP90 11" (27.9 cm) round stainless steel with No. 2L bright finish on exterior.
SP185

High-Visibility Stripe
Model SP185 self-adhesive high visibility 21" (53.3 cm) long stripe in Safety Green and bright yellow.
SP178

Universal Sign
Model SP178 vertical universal combination emergency shower and eyewash sign. Size: 8" x 10-3/4" (20.3 x 27.3 cm).
SP228

Eyewash Valve
Model SP228 Type 316 stainless steel stay-open ball valve, equipped with a stainless steel ball and stem.
SP170

Test This Week Tag
SP170 is a green waterproof test card with space for date and initials of inspector. Used to record weekly testing of emergency equipment.
SP509SS

In-Line Strainer
Model SP509SS is a Type 304 stainless steel in-line 50 x 50 mesh water strainer.
9102

Dust Cover
Model 9102 is a stainless steel cover that protects the eyewash heads as well as the bowl. Pushing the stainless steel flag will activate the unit while raising the dust cover. (Picture shows cover mounted to an eyewash.)
0005717000

Mounting
Part 0005717000, 9" (22.9 cm) diameter cast finish Type 304 Stainless Steel floor flange with three mounting holes. 1-1/4" MIPS.
SP829SS

Showerhead
Model SP829SS, AXION MSR™ stainless steel drench shower head with integral 20 gpm (75.7 L) flow control.
SP65SS

Eye/Face Wash Head Assembly
Model SP65SS, AXION MSR™ stainless steel eye/face wash head with inverted directional flow, laminar flow, and integral flow control.

Model 8330 Options & Accessories

SP220SS

Foot Treadle
Model SP220SS foot control assembly, including chain, clamp, nut, ring, screw, spring and stainless steel treadle.
9001

Alarm
Model 9001, 120 VAC emergency alarm and light system. Buzzer and flashing light are activated by a double pole, double throw flow switch.
9020

Universal Sign
Model 9020 green and yellow ABS plastic 3-sided high visibility sign.
9037

Privacy Curtain
Model 9037, privacy curtain designed to be used on horizontal emergency drench shower or combination emergency drench shower and eyewash units.
9010

Shower Test Kit
Model 9010 shower test kit.
SP178LG

Universal Sign
Model SP178LG large vertical universal combination emergency shower and eyewash sign. Size: 18" x 24" (45.7 x 61 cm).
9201E

Tempered Water Blending Valves
Model 9201E Emergency Valve thermostatically mixes hot and cold water to provide a safe fluid supply for emergency showers and eyewash equipment, with a flow rate of 31 gpm (117.3 L).
TWBS.SHE

Tempered Water Blending Systems
Model TWBS.SHE; Lead-free Emergency Valve thermostatically mixes hot and cold water to provide a safe fluid supply for emergency shower and eyewash equipment, with a flow rate of 74 gpm (280 L).
9201H

Tempered Water Blending Valves
Model 9201H; Lead-free Emergency Valve thermostatically mixes hot and cold water to provide a safe fluid supply for emergency showers and eyewash equipment, with a flow rate of 31 gpm (117.3 L).

Pricing Info

U.S. List Price: $2785.00  Pricing Terms

Model 8330 Downloads

Cleaning & Maintenance

Clean and polish with Wright's silver cream; or use mild detergent, liquid soap, or commercial chrome polish. Do not use abrasive or caustic cleaners.

Model 8330 Sample Specifications

Model 8330 all stainless steel combination shower and eye/face wash shall include a stainless steel 11" (27.9 cm) round bowl, an AXION MSR™ stainless steel eye/face wash head that supplies an inverted directional laminar flow which achieves zero vertical velocity supplied by an integral flow control. Unit shall also include the AXION MSR™ hydrodynamic design stainless steel showerhead with flow control, stainless steel dust cover, stainless steel 50 x 50 mesh water strainer, and stainless steel stay-open shower and eyewash ball valves equipped with stainless steel ball and stem. Unit shall also include a stainless steel cast 9" (22.9 cm) diameter floor flange, Type 304 Stainless Steel pipe and fittings, universal sign, self-adhesive high visibility Safety Green and bright yellow stripes, and 1-1/4" IPS supply.

Model 8330 Reviews Write a Review

No Reviews Yet