Model 8317CTFPC1D1

Model 8317CTFPC1D1

Model 8317CTFPC1D1, 120 VAC cable heated, freeze-resistant, combination shower and eye/face wash, with top or bottom supply, and rated for C1D1 applications, and with AXION MSR™ eye/face wash and showerhead.


Write a Review

Model 8317CTFPC1D1 Description

Haws Model 8317CTFPC1D1 heat traced combination shower and eye/face wash features the medically acclaimed AXION MSR™ eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR™ also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Virtually eliminating mishaps, the unit’s safety features include: a thermal actuator bleed valve, 120V thermostat cable double wrapping inside piping, 3/4" (1.9 cm) insulation surrounding piping and outside jacket to prevent freezing, as well as a universal emergency sign.

  • Perfect for extreme weather conditions dropping down to -30° F (-34.4° C)
  • Universal design allows for top or bottom water supply.
  • Requires minimal maintenance and is equipped with test card to record weekly testing
  • Reducing installation time, entire unit is pre-built and fully water/pressure tested
  • Solid stainless steel pipe stanchion and galvanized fittings make for one sturdy piece of corrosive resistant equipment
  • Rated Class 1, Div 1, Group B, C & D. Tempering code T6


Model 8317CTFPC1D1 is certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment. Model is CSA electrical certified.

Buy America Act Information

The vast majority of Haws products qualify under the terms of the act. However, since different purchases often require subtly different responses, Haws recommends that the specific document requesting certification be sent to customer service for a specific answer.

Industry Standards Compliant

Model 8317CTFPC1D1 Components

SP260

Shower Valve
Model SP260 chrome-plated brass stay-open ball valve, equipped with a stainless steel ball and stem.
SP200

Pull Rod
Model SP200, 28" (71.1 cm) long stainless steel pull rod with triangular handle.
SP229

Eyewash Valve
Model SP229 chrome-plated brass stay-open ball valve, equipped with a stainless steel ball and stem.
SP238

Eyewash Valve
Model SP238 chrome-plated brass stay-open vertical ball valve, equipped with a stainless steel ball and stem.
SP75

Mounting
Model SP75 gray powder-coated cast-iron 9" (22.9 cm) diameter floor flange.
SP158A

Bleed Valve
Model SP158A is a freeze protection bleed valve recommended for areas that experience occasional "snap freezes".
SP155

Thermostat
Model SP155 is a thermostat for the heat traced cable outdoor Models 8317CTFP and 8317CTFP.220V
SP178

Universal Sign
Model SP178 vertical universal combination emergency shower and eyewash sign. Size: 8" x 10-3/4" (20.3 x 27.3 cm).
SP170

Test This Week Tag
SP170 is a green waterproof test card with space for date and initials of inspector. Used to record weekly testing of emergency equipment.
SP829

Showerhead
Model SP829, AXION MSR™ ABS plastic drench shower head with integral 20 gpm (75.7 L) flow control.
SP65CTFP

Eye/Face Wash Head Assembly
Model SP65CTFP, AXION MSR™ eye/face wash head with inverted directional flow, laminar flow, and integral flow control.

Model 8317CTFPC1D1 Options & Accessories

SP157A

Bleed Valve
Model SP157A, stainless steel scald protection bleed valve. Automatic thermal actuator bleed valve opens when internal shower water temperature reaches 110° F (43.3° C) and closes at 95° F (35° C).
SP178LG

Universal Sign
Model SP178LG large vertical universal combination emergency shower and eyewash sign. Size: 18" x 24" (45.7 x 61 cm).
9010

Shower Test Kit
Model 9010 shower test kit.
9201E

Tempered Water Blending Valves
Model 9201E Emergency Valve thermostatically mixes hot and cold water to provide a safe fluid supply for emergency showers and eyewash equipment, with a flow rate of 31 gpm (117.3 L).
TWBS.SHE

Tempered Water Blending Systems
Model TWBS.SHE; Lead-free Emergency Valve thermostatically mixes hot and cold water to provide a safe fluid supply for emergency shower and eyewash equipment, with a flow rate of 74 gpm (280 L).
SP829SS

Showerhead
Model SP829SS, AXION MSR™ stainless steel drench shower head with integral 20 gpm (75.7 L) flow control.
9201H

Tempered Water Blending Valves
Model 9201H; Lead-free Emergency Valve thermostatically mixes hot and cold water to provide a safe fluid supply for emergency showers and eyewash equipment, with a flow rate of 31 gpm (117.3 L).

Pricing Info

U.S. List Price: $9975.00  Pricing Terms

Model 8317CTFPC1D1 Downloads

Cleaning & Maintenance

Clean with a mild detergent or soap and water for removing stains and fingerprints.

Model 8317CTFPC1D1 Sample Specifications

Model 8317CTFPC1D1 freeze-resistant 120 VAC cable heated combination shower and eye/face wash shall include the AXION MSR™ hydrodynamic designed green ABS plastic 10-5/8" (26.9 cm) showerhead with integral self-regulating flow control, an AXION MSR™ eye/face wash head shall feature inverted directional laminar flow which achieves zero vertical velocity supplied by an integral flow control, chrome-plated brass shower and eyewash ball valves equipped with stainless steel ball and stem, separate ball valve activated hose spray, and automatic thermal actuator freeze protection bleed valve. Unit shall also include thermostatically controlled electric heat traced cable protected by 3/4" (1.9 cm) insulation and an ABS plastic green jacket that prevents freezing down to ambient temperatures of -30° F (-34.4° C), powder-coated cast-iron 9" (22.9 cm) diameter floor flange, universal sign, 1-1/4" IPS supply, and rated Class 1, Div 1, Group B, C & D.

Model 8317CTFPC1D1 Reviews Write a Review

No Reviews Yet