Model 8317CTFP.220V

Model 8317CTFP.220V

U.S. List Price: $4420.00

Pricing Terms

Model 8317CTFP.220V cable heated, freeze-resistant, combination shower and eye/face wash, with top or bottom supply.

Model 8317CTFP.220V Product Details

Haws Model 8317CTFP.220V heat traced combination shower combines the use of an ABS showerhead and eye/face wash assembly for the irrigation process. This emergency combination unit is equipped with green flip-top dust covers, so when debris is present, the irrigation process stays protected. Virtually eliminating mishaps, the unit’s safety features include: a thermal actuator bleed valve, 220V thermostat cable double wrapping inside piping, 3/4" insulation surrounding piping and outside jacket to prevent freezing, as well as a universal emergency sign.

  • Perfect for extreme weather conditions dropping down to -30°F.
  • Universal design allows for top or bottom water supply.
  • Requires minimal maintenance and is equipped with test card to record weekly testing.
  • Reducing installation time, entire unit is pre-built and fully water/pressure tested.
  • Solid stainless steel pipe stanchion and galvanized fittings make for one sturdy piece of corrosive resistant equipment.
  • Rated Class 1, Division 2, Group B, C and D.


Model 8317CTFP.220V is certified by CSA & IAPMO to meet the ANSI Z358.1-2009 Standard for Emergency Eyewash and Shower Equipment.

Buy America Act Information

The vast majority of Haws products qualify under the terms of the act. However, since different purchases often require subtly different responses, Haws recommends that the specific document requesting certification be sent to customer service for a specific answer.

Model 8317CTFP.220V Components

SP155

Thermostat
Model SP155 is a thermostat for the heat traced cable outdoor Models 8317CTFP and 8317CTFP.220V
SP158A

Bleed Valve
Model SP158A is a freeze protection bleed valve recommended for areas that experience occasional "snap freezes".
SP170

Test This Week Tag
SP170 is a green waterproof test card with space for date and initials of inspector. Used to record weekly testing of emergency equipment.
SP178

Universal Sign
Model SP178 vertical universal combination emergency shower and eyewash sign. Size: 8" x 10-3/4".
SP200

Pull Rod
Model SP200, 28" long stainless steel pull rod with triangular handle.
SP229

Eyewash Valve
Model SP229 chrome-plated brass stay-open ball valve, equipped with a stainless steel ball and stem. Full flow occurs with push on stainless steel flag. 1/2" IPS inlet and outlet.
SP75

Mounting
Model SP75 gray powder-coated cast-iron 9" diameter floor flange with 1-1/4" IPS hot-dipped galvanized tee.
SP21FC

Eye/Face Wash Head
Model SP21FC ABS green plastic eye/face wash head with built-in 2.5 gpm flow control with integral flip top dust cover that automatically releases with flow of water. 1/4" IPS.
SP260

Shower Valve
Model SP260 chrome-plated brass stay-open ball valve, equipped with a stainless steel ball and stem. Full flow occurs with pull on lever. 1" IPS.

Model 8317CTFP.220V Options & Accessories

SP157A

Bleed Valve
Model SP157A, stainless steel scald protection bleed valve. Automatic thermal actuator bleed valve opens when internal shower water temperature reaches 110°F (43.3°C) and closes at 95°F (35°C).
8127FC

Shower Head
Model 8127FC, corrosion-resistant 10-1/2" stainless steel showerhead with integral 20 gpm flow control.
9202

Tempered Water Blending Valves
Model 9202, thermostatic mixing valve that mixes hot and cold water for the tempering of shower units at a maximum flow rate of 40 gpm.
TWBS.SH

Tempered Water Blending Systems
Model TWBS.SH, prepackaged, fully engineered and tested system for mixing hot and cold water to provide tempered water up to 40 gpm for emergency showers and eyewashes (Pat.# 5,350,112).

Model 8317CTFP.220V Downloads

Cleaning & Maintenance

Clean with water.

Model 8317CTFP.220V Sample Specifications

Model 8317CTFP.220V freeze-resistant 220 VAC cable heated combination shower and eye/face wash shall include a green ABS plastic 10-5/8" showerhead with integral self-regulating 20 gpm flow control, green ABS plastic eye/face wash heads with integral flow controls and dust covers, brass shower and eyewash ball valves equipped with stainless steel ball and stem, separate ball valve activated hose spray, and automatic thermal actuator freeze protection bleed valve. Unit shall also include thermostatically controlled electric heat traced cable protected by ¾" insulation and an ABS plastic green jacket that prevents freezing down to ambient temperatures of -30°F, powder-coated cast-iron 9" diameter floor flange, universal sign, 1-1/4" IPS supply, and rated Class I, Division 2, Group B, C and D. (Class I, DIV I is available as a special option)