Model 8300.158

Model 8300.158

U.S. List Price: $1815.00

Pricing Terms

Model 8300.158, combination shower and Soft-Flo eyewash, with stainless steel receptor and freeze protection bleed valve.

Model 8300.158 Product Details

The Haws 8300.158 combines the use of an ABS showerhead and anti-surge Soft-Flo eyewash heads for the irrigation process. Emergency combination unit is equipped with an in-line 50 x 50 mesh water strainer and pop-off dust covers, so when debris is present, the irrigation process stays protected. Virtually eliminating mishaps, the unit’s safety features include: universal emergency sign, high visibility stripe, and a thermal actuator bleed valve to protect from temporary internal freezing.

  • A great addition to unsafe environments where the eyes and body may be exposed to corrosive materials.
  • Requires minimal maintenance and is equipped with test card to record weekly testing.
  • Reducing installation time, eyewash and valve assembly is pre-built and fully water/pressure tested.
  • Solid galvanized steel construction make for one sturdy piece of emergency equipment.
  • Certified by CSA & IAPMO to meet the ANSI Z358.1-2009 Standard for Emergency Eyewash and Shower Equipment.

Buy America Act Information

The vast majority of Haws products qualify under the terms of the act. However, since different purchases often require subtly different responses, Haws recommends that the specific document requesting certification be sent to customer service for a specific answer.

Industry Standards Compliant

Model 8300.158 Components

SP158A

Bleed Valve
Model SP158A is a freeze protection bleed valve recommended for areas that experience occasional "snap freezes".
9095

Dust Cover
Model 9095 green polyethylene plastic dust cover. Dust covers protect heads and automatically releases with water pressure.
SP229.158

Eyewash Valve
Model SP229.158 chrome-plated brass stay-open ball valve equipped with a stainless steel ball and stem. Special self-draining feature allows valve and connecting lines to eyewash to drain to prevent freezing. Full flow occurs with push on stainless steel flag. 1/2" IPS inlet and outlet.
SP185

High-Visibility Stripe
Model SP185 self-adhesive high visibility 21" long stripe in Safety Green and bright yellow.
SP75

Mounting
Model SP75 gray powder-coated cast-iron 9" diameter floor flange with 1-1/4" IPS hot-dipped galvanized tee.
SP200

Pull Rod
Model SP200, 28" long stainless steel pull rod with triangular handle.
SP90

Receptor
Model SP90 11" round stainless steel with No. 2L bright finish on exterior.
8129FC

Discontinued Emergency Equipment
Model 8129FC green ABS plastic 10-5/8" showerhead with integral 20 gpm flow control.
SP260.158

Shower Valve
Model SP260.158 chrome-plated brass stay-open ball valve, equipped with a stainless steel stem. Full flow occurs with pull on lever. Special self-draining feature allows valve and connecting lines to showerhead to drain to prevent freezing. Full flow occurs with pull on lever. 1" IPS.
SP170

Test This Week Tag
SP170 is a green waterproof test card with space for date and initials of inspector. Used to record weekly testing of emergency equipment.
SP178

Universal Sign
Model SP178 vertical universal combination emergency shower and eyewash sign. Size: 8" x 10-3/4".
SP11FC

Eyewash Head
Model SP11FC green ABS plastic anti-surge Soft-Flo eyewash head with built-in 1.2 gpm flow control. 1/4" IPS.
SP62FC

Eyewash Head Assembly
Model SP62FC with Soft-Flo SP11FC ABS plastic eyewash anti-surge heads, one-piece electropolished Type 304 stainless steel eyewash yoke, and 9095 dust covers. 1/4" IPS.

Model 8300.158 Options & Accessories

9001

Alarm
Model 9001, 120 VAC emergency alarm and light system. Buzzer and flashing light are activated by a double pole, double throw flow switch.
9102

Dust Cover
Model 9102 is a stainless steel cover that protects the eyewash heads as well as the bowl. Pushing the stainless steel flag will activate the unit while raising the dust cover.
8127FC

Shower Head
Model 8127FC, corrosion-resistant 10-1/2" stainless steel showerhead with integral 20 gpm flow control.
TWBS.SH

Tempered Water Blending Systems
Model TWBS.SH, prepackaged, fully engineered and tested system for mixing hot and cold water to provide tempered water up to 40 gpm for emergency showers and eyewashes (Pat.# 5,350,112).
9202

Tempered Water Blending Valves
Model 9202, thermostatic mixing valve that mixes hot and cold water for the tempering of shower units at a maximum flow rate of 40 gpm.
9037

Privacy Curtain
Model 9037, privacy curtain designed to be used on horizontal emergency drench shower or combination emergency drench shower and eyewash units.
9020

Universal Sign
Model 9020 green and yellow ABS plastic 3-sided high visibility sign.
8901RFK

Hose & Spray Unit
Model 8901RFK, body spray unit with ABS plastic head, stay open squeeze lever valve, 8 foot hose, and installation kit.
9010

Shower Test Kit
Model 9010 shower test kit includes holding rod, upper corrosion-resistant ring to encircle the shower head, and Tyvek waterproof tunnel shaped tube to guide the water column to container or drain.
SP178LG

Universal Sign
Model SP178LG large vertical universal combination emergency shower and eyewash sign. Size: 18" x 24".
9001EXP

Alarm
Model 9001EXP 120 VAC Class 1, Division 2, Groups B, C, and D emergency alarm system. Buzzer and flashing light are activated by an 1-1/4" double pole, double throw flow switch.
9001DPDT

Discontinued Emergency Equipment
Model 9001DPDT 120 VAC emergency alarm and light system. Buzzer and flashing light are activated by flow switch when emergency shower or eyewash is in use. Extra set of electrical contacts for remote alarm hookup.

Model 8300.158 Downloads

Cleaning & Maintenance

Clean with water.

Model 8300.158 Sample Specifications

Model 8300.158 combination shower and eyewash shall include a green ABS plastic 10-5/8" showerhead with integral self-regulating 20 gpm flow control, stainless steel 11" round bowl, stainless steel eyewash yoke assembly with green Soft-Flo ABS plastic eyewash anti-surge heads with integral flow controls and dust covers, chrome-plated brass stay-open shower and eyewash ball valves equipped with stainless steel ball and stem, and automatic thermal actuator freeze protection bleed valve that will start to open when the water temperature falls below 40°F and fully opens at 35°F (1.66°C), will start to close at 38°F with it fully closing at 45°F (7.22°C). Unit shall also include powder-coated cast-iron 9" diameter floor flange, universal sign, self-adhesive high visibility safety green and bright yellow stripes, and 1-1/4" IPS supply.