Model HWUACP8LSS

• Request a Quote
• Find a Rep

• Share It
• Email to a friend
• Print this page

Model HWUACP8LSS Description

This model has been discontinued.

Model HWUACP8LSS Bi-level barrier-free pressure drinking water cooler shall deliver a minimum of 8 gph (30.3 LPH) of water at 50°F (10°C) cooled from 80°F (26.7°C) inlet water at 90°F (32.2°C) ambient. Each cooler shall have front and side mounted push pads requiring less than 5 pounds of force to activate that initiate water flow through a flexible hooded rubber bubbler having a non-squirt feature. An internally mounted valve and adjustable stream regulator shall control water flow between 20 and 90 psig. R-134a refrigeration system shall be hermetically sealed and refrigerant flow shall be capillary tube controlled. An adjustable thermostat having an off position shall control refrigeration system. Stainless steel top shall have integral drain strainer. Heavy-duty galvanized frame shall support stainless steel panels.

Potable water system components shall comply with the Safe Drinking Water Act Amendments, the 1988 Lead Contamination Control Act and shall be Certified to ANSI/NSF Standard 61, Section 9. Chilled water capacity shall be rated per ARI Standard 1010. Cooler shall be Listed by Underwriters Laboratories Inc. to U.S. and Canadian safety standards. Drinking water cooler shall comply with ANSI A117.1 and ADA frontal approach and protruding object requirements.

Model HWUACP8LSS delivers 8.0 gallons of chilled drinking water per hour

FEATURES

Standard

Built-in 100 micron strainer stops particles before they enter the waterway
Waterways are lead-free in materials and construction
Stainless steel top
Heavy-duty galvanized steel frame
High efficiency cooling tank and coil
Refrigerant R-134a
Four push pad activation
External stream height adjustment

OPTIONS (at additional charge)

Glass Filler (Factory Installed)

INSTALLATION

Prior to roughing consult with local, state and federal codes for proper mounting height.
Shipped with complete instructions and wall mounting bracket
Removable lower panel provides easy access for installation

FINISHES

Standard Cabinet Finish: Stainless Steel

Model: HWUACP8LSS
Cooling Capacity: 8.0 gph (30.3 LPH)
115 Volts, 60Hz
Full Load Amps: 4.6
Rated Watts: 460
Glass Filler Accessory Option: Yes

Drinking water cooler is Certified to ANSI/NSF 61. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

Buy America Act Information

The vast majority of Haws products qualify under the terms of the act. However, since different purchases often require subtly different responses, Haws recommends that the specific document requesting certification be sent to customer service for a specific answer.

Model HWUACP8LSS Components

Model HWUACP8LSS Options & Accessories

	Glass Filler Model 5551, push lever operated, self-closing, polished chrome-plated brass, deck mounted, gooseneck cold water glassfiller faucet.
	Filter Model 6426, 12" x 2" (30.5 x 5.1 cm), in-line lead removal element that reduces lead from incoming water supply.

Model HWUACP8LSS Reviews Write a Review