Model HWBFA8.VRC

• Request a Quote
• Find a Rep

• Share It
• Email to a friend
• Print this page

Model HWBFA8.VRC Description

This model has been discontinued.

The Haws model HWBFA8.VRC vandal-resistant electric water cooler is a wall mounted barrier-free drinking fountain that delivers 7.7 gph of 50°F water and is designed for commercial and institutional applications. This model features a 14 gauge satin finish stainless steel cabinet with integral basin. The ventilation louvers are covered on the inside by a framed stainless steel wire mesh screen which is welded to the inside of the cabinet. The cooler is activated by a push button valve assembly allowing for front access stream adjustment to supply the vandal-resistant polished-chrome plated brass bubbler that features a non-squirt flow.

• Heavy-duty 14 gauge construction with vandal-resistant bubbler, button, and front access panel is perfect for vandal-prone areas.
• Patented push button valve assembly allows for front access stream adjustment for ease of maintenance.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

Buy America Act Information

The vast majority of Haws products qualify under the terms of the act. However, since different purchases often require subtly different responses, Haws recommends that the specific document requesting certification be sent to customer service for a specific answer.

Model HWBFA8.VRC Components

	Bubbler Head Model 5703M, polished chrome-plated forged brass, integral basin shank, shielded, anti-squirt, vandal-resistant bubbler head with 100% lead-free waterways.
	Push Button Model PBA7, push button assembly has a polished chrome-plated finish.
	Discontinued Drinking Fountains Model 5874, patented* lead-free forged brass, push activated valve, front accessible for stream adjustment and servicing, replaceable pressure regulation control cartridge. (Patent No. 6,981,692).
	Accessory Part 0006983506 spanner wrench is used to remove the PBA6 and PBA7 push button cover used with the 5874 valve. Also used to remove retaining ring for replacing the cartridge and screen (VRK5874 kit) in 5874 valve assembly.

Model HWBFA8.VRC Options & Accessories

Filter Model 6426, 12" x 2" (30.5 x 5.1 cm), in-line lead removal element that reduces lead from incoming water supply.

Model HWBFA8.VRC Reviews Write a Review