Model H1001.8HPS

Model H1001.8HPS

Model H1001.8HPS, barrier-free, 18 gauge, high polished stainless steel electric water cooler with round sculpted bowl, and 100% lead-free waterways.

REQUIRES MODEL HCR8 AND MTGFR.SM PRICED SEPARATELY.


Write a Review

Model H1001.8HPS Description

Model H1001.8HPS electric water cooler provides 8 gph (30.3) chilled water performance in an engineered polished stainless steel skin. It uses a patented stainless steel push-button valve assembly (Pat.# 6,981,692) allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal resistant bubbler head, waste strainer, and bottom plate, this electric water cooler is quick to discourage vandals.

  • 18 gauge Type 304 high-polished stainless steel bowl assembly mounted on a 14 gauge Type 304 high-polished stainless steel wall bracket
  • 100% lead-free waterways
  • Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
  • Maintenance is made easy with front access to valve adjustment and cartridge replacement
  • Designed to run at a low energy usage, this water cooler is assured to have a long lasting life
  • Laminar flow prevents splashing, keeping the drinking area contained and clean
  • Beautiful polished finish resists stains and corrosion


Model H1001.8HPS meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

Buy America Act Information

The vast majority of Haws products qualify under the terms of the act. However, since different purchases often require subtly different responses, Haws recommends that the specific document requesting certification be sent to customer service for a specific answer.

Industry Standards Compliant

Model H1001.8HPS Components

PBM1000

Bottom Plate
Model PBM1000, stainless steel bottom plate for 1001 series "swirl" bowl bracket.
BP6HPS

Back Panel
Model BP6HPS, high polished stainless steel back panel.
6463PCP

Waste Strainer
Model 6463PCP, polished chrome-plated vandal-resistant waste strainer with anti-airlock draining feature.
MTGFR.SM

Mounting
Priced Separately, Model MTGFR.SM mounting frame is made of heavy gauge galvanized steel with pre-punched mounting holes and is used with Haws single bubbler electric fountains.
5705

Bubbler Head
Model 5705, sculpted, polished chrome-plated brass, shielded, anti-squirt, integral basin shank, vandal-resistant solid brass bubbler head with 100% lead-free waterways, which features laminar flow to prevent splashing.
HCR8

Chiller
Model HCR8, 8 gph remote water chiller provides instantaneous cooling to meet a continuous demand for chilled water.
PBA6

Push Button
Model PBA6, flanged push button assembly has a polished chrome-plated finish. For flush mounted (not recessed) push button fountains.
0006983506

Accessory
Part 0006983506 spanner wrench is used to remove the PBA6 and PBA7 push button cover used with the 5874 valve. Also used to remove retaining ring for replacing the cartridge and screen (VRK5874 kit) in 5874 valve assembly.
5874SS

Valve
Model 5874SS, patented lead-free stainless steel, push activated valve, front accessible for stream adjustment and servicing, replaceable pressure regulation control cartridge, with an operating pressure range of 30 - 90 psi (2.1 - 6.2 bar). (Patent No. 6,981,692).

Model H1001.8HPS Options & Accessories

6426

Filter
Model 6426, 12" x 2" (30.5 x 5.1 cm), in-line lead removal element that reduces lead from incoming water supply.

Pricing Info

U.S. List Price: $2630.00  Pricing Terms

Model H1001.8HPS Downloads

Cleaning & Maintenance

Clean and polish with Wright's silver cream; or use mild detergent, liquid soap, or commercial chrome polish. Do not use abrasive or caustic cleaners.

Model H1001.8HPS Sample Specifications

Model H1001.8HPS electric wall mounted barrier-free water cooler shall include an 18 gauge Type 304 polished stainless steel finish basin with integral swirl design, 14 gauge Type 304 high-polished stainless steel wall bracket, 100% lead-free waterways, push-button operated stainless steel valve with front-accessible cartridge and flow adjustment, polished chrome-plated brass vandal-resistant bubbler head with integral laminar anti-squirt flow, chrome-plated brass vandal-resistant waste strainer, vandal-resistant bottom plate, polished stainless steel finish back panel and louvered intrusion-proof grill, and 1-1/4" (3.2 cm) O.D. waste pipe. The R-134a refrigeration system is hermetically sealed and delivers a minimum of 8 gph (30.3 L) of water at 50° F (10° C) cooled from 80° F (26.7° C) inlet water at 90° F (32.2° C) ambient. 115 Volts, 60Hz, rated watts: 370, full load amps: 5.

Model H1001.8HPS Reviews Write a Review

No Reviews Yet