Model H1001.8

Model H1001.8

U.S. List Price: $1300.00

Pricing Terms

Model H1001.8, barrier-free, satin finish stainless steel electric drinking fountain with round sculpted bowl.

REQUIRES MODEL HCR8 AND MTGFR.SM PRICED SEPARATELY.

Model H1001.8 Product Details

Model H1001.8 electric drinking fountain provides 8 gph chilled water performance in an engineered stainless steel skin. It uses a patented stainless steel push-button valve assembly (Pat.# 6,981,692) allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal resistant bubbler head, waste strainer, and bottom plate, this electric drinking fountain is quick to discourage vandals.

  • 18 gauge Type 304 Stainless Steel bowl assembly mounted on a 14 gauge Type 304 Stainless Steel wall bracket.
  • Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris.
  • Maintenance is made easy with front access to valve adjustment and cartridge replacement.
  • Designed to run at a low energy usage, this water cooler and fountain are assured to have a long lasting life.
  • Laminar flow prevents splashing, keeping the drinking area contained and clean.
  • Beautiful satin finish resists stains and corrosion.


Model H1001.8 meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws Co. manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

Buy America Act Information

The vast majority of Haws products qualify under the terms of the act. However, since different purchases often require subtly different responses, Haws recommends that the specific document requesting certification be sent to customer service for a specific answer.

Industry Standards Compliant

Model H1001.8 Components

5705

Bubbler Head
Model 5705, sculpted, polished chrome-plated brass, shielded, anti-squirt, integral basin shank, vandal-resistant bubbler head features laminar flow to prevent splashing.
HCR8

Chiller
Model HCR8, 8 gph remote water chiller provides instantaneous cooling to meet a continuous demand for chilled water.
MTGFR.SM

Mounting
Priced Separately, Model MTGFR.SM mounting frame is made of heavy gauge galvanized steel with pre-punched mounting holes and is used with Haws single bubbler electric fountains.
6463

Waste Strainer
Model 6463 is a satin chrome-plated vandal-resistant waste strainer with anti-airlock draining feature. Includes fiber washer and 1-1/2" locknut, 1-1/2" NPS.
BP6

Back Panel
Model BP6, satin finish stainless steel back panel.
PBM1000

Bottom Plate
Model PBM1000, stainless steel bottom plate for 1001 series "swirl" bowl bracket.
PBA6

Push Button
Model PBA6, flanged push button assembly has a polished chrome-plated finish. For flush mounted (not recessed) push button fountains.
5874

Discontinued Drinking Fountains
Model 5874, patented* lead-free forged brass, push activated valve, front accessible for stream adjustment and servicing, replaceable pressure regulation control cartridge. (Patent No. 6,981,692).
0006983506

Accessory
Part 0006983506 spanner wrench is used to remove the PBA6 and PBA7 push button cover used with the 5874 valve. Also used to remove retaining ring for replacing the cartridge and screen (VRK5874 kit) in 5874 valve assembly.
5874SS

Valve
Model 5874SS, stainless steel push activated valve, front accessible for stream adjustment and servicing, replaceable pressure regulation control cartridge, with an operating pressure range of 30 to 90 psi.

Model H1001.8 Options & Accessories

6426

Filter
Model 6426, 12" x 2", in-line lead removal element that reduces lead from incoming water supply.
5725

Bubbler Head
Model 5725 EnviroGard™ bubbler is a polished chrome-plated solid brass bubbler head with stainless steel water activated pop up canopy. (Pat.# 7,025,282)

Model H1001.8 Downloads

Cleaning & Maintenance

Clean and polish with Wright's silver cream; or use mild detergent, liquid soap, or commercial chrome polish. Do not use abrasive or caustic cleaners.

Model H1001.8 Sample Specifications

Model H1001.8 electric wall mounted barrier-free drinking fountain shall include an 18 gauge Type 304 Stainless Steel satin finish basin with integral swirl design, 14 gauge Type 304 Stainless Steel wall bracket, push-button operated stainless steel valve with front-accessible cartridge and flow adjustment, polished chrome-plated brass vandal-resistant bubbler head with integral laminar anti-squirt flow, chrome-plated brass vandal-resistant waste strainer, vandal-resistant bottom plate, stainless steel satin finish back panel and louvered intrusion-proof grill, and 1-1/4" O.D. waste pipe. The R-134a refrigeration system is hermetically sealed and delivers a minimum of 8 gph (30.3 lph) of water at 50°F (10°C) cooled from 80°F (26.7°C) inlet water at 90°F (32.2°C) ambient. 115 Volts, 60Hz, rated watts: 370, full load amps: 5.