For over 103 years, Haws has been committed to bringing the highest quality water delivery and emergency equipment products to a wide variety of markets.
CRP Coating
Haws uses Sherwin Williams Tile-Clad II Epoxy when an emergency model is CRP (corrosion resistant paint) coated. This is a two part liquid epoxy which is sprayed on the model and air dried.
The valves, bowl, eyewash and shower head assemblies, pull rods and flow controls are constructed of corrosion-resistant ABS plastic, stainless steel or chrome-plated brass, and are not CRP coated.
Tile-Clad II Epoxy B62
Series Gloss Hardener B60V70
Recommended Uses:
For use over prepared substrates such as steel, galvanizing, and concrete in industrial environments.
- Laboratories
- Masonry surfaces
- Offshore structures
- Storage tanks
- Chemical processing equipment
- Institutional & commercial wall coating
- Structural & support steel
- Institutional kitchens
- Lavatories
- Power plants
- Schools
- Marine applications
- Nuclear power facilities
Product Description:
TILE-CLAD HIGH SOLIDS is a VOC compliant, two-package, epoxy-polyamide coating for use in industrial maintenance environments and high performance architectural applications.
- Chemical resistant
- Dry film resists bacterial attack
- Abrasion resistant
- Suitable for use in USDA inspected facilities
- Low VOC
Physical Properties:
| Quality | Endurance | Quality | Endurance | Resistance Guide |
| Abrasion Resistance (ASTM D4060, CS-17 wheel, 1,000 cycles, 1 kg. Taber Abraser) | 132 mg | Moisture Condensation Resistance (ASTM D2247, 100°F, 1500 hours) | No Failure | (per ASTM D3912) Alcohols, formaldehyde, glycol ethers, selected chlorinated solvents: MODERATE Aliphatic hydrocarbon solvents, gasoline, derosene, fuel oil: SEVERE Alkalies: SEVERE Aromatic hydrocarbon solvents: MODERATE Animal and vegetable fats and oils, cutting oils, lubricating oils: SEVERE Fresh and salt water: SEVERE Weak solutions of mineral and organic acids: MODERATE Characteristics Color/Finish: OSHA Green Gloss: 90 +/- 10 units @ 60°F |
| Direct Impact Resistance (ASTM G14) | 84 in. lbs. | Pencil Hardness (ASTM D3363) | B | |
| Dry Heat Resistance (ASTM D2485; OSHA Red; 150°F) (Discolors) | 250°F | Salt Fog Resistance (ASTM D2986, 9,700 cycles) | Good | |
| Elcometer Adhesion (ASTM D4541) | 750 psi | Scrub Resistance (ASTM D2986, 9,700 cycles) | No Gloss Charge | |
| Exterior (with nonprogressive chalk face developing in 3 months) | Excellent | Thermal Shock (ASTM B1211, 5 cycles) | Excellent | |
| Flexibility (ASTM D1737, 180° Bend, 1/4" mandrel) | Passes | Washability and Stain Resistance For complete removal of lipstick, tea, Coke, butter, ketchup, fruit juice | Maximum 25 cycles |
